●Sn-Pb alloy solders are made of electrolytic tin and lead with very high purity.
●It is cast by advanced smelting process to remove several harmful impurities and dissolved gaseous intermediates. It meets the GB8012-2000 standard.
●Antioxidant alloys are added to all solder rods. The working temperature is below 300 degrees. The solder level is bright and the oxide slag is very few. It is suitable for any type of hot dip and wave soldering.
●It has good wettability and solderability, bright solder joints and few bad soldering phenomena.
Tin-lead solder rod
Model
Sn63Pb37
Sn60Pb40
Sn55Pb45
Sn50Pb50
Sn45Pb55
Sn40Pb60
Sn30Pb70
Density
8.4
8.5
8.7
8.9
9.1
9.3
9.7
Melting point temperature
183
183-190
183-203
183-215
183-221
185-235
185-255
Working temperature
220-240
250-260
260-280
280-300
280-320
295-325
305-340
Application
Computer, Precision Instruments, Instruments, Television Sets, Microtechnology, Coated Metals
Calculator, telephone, quartz clock and other common electronics and electrical appliances.
General circuit boards, toys, light bulbs, handicrafts, etc.
Remarks
●The working temperature mentioned above is the normal working temperature of wave soldering. The specific working temperature depends on the actual production process requirements.
●Lead solders with other special components should be consulted by our company.
●The above product specifications, parameters and testing standards are subject to change without prior notice. Please refer to the product specifications issued by our company.
